Ram ProMaster Van Performance

Paul Sherry Conversion Vans

<<<Return to Ram ProMaster Overview

Ram ProMaster Conversion Van Performance

  1. 3.0L I4 Turbo Diesel Engine
  2. 3.6L Pentastar Flex-Fuel V6 Engine
  3. Engine Block Heater
  4. Hill Start Assist
  5. Six-Speed Automated Manual Transmission
  6. Six-Speed Automatic Transmission
  7. Suspensions
  8. Tow/Haul Mode

 

1. 3.0L I4 Turbo Diesel Engine – Available 3.0L EcoDiesel I4 engine features:

  • 174 hp and 295 lb-ft of torque
  • Electronically controlled high-pressure common-rail fuel injection
  • Variable geometry turbocharging

 

2. 3.6L Pentastar Flex-Fuel V6 Engine – Standard 3.6L Pentastar V6 engine features:

  • Dual overhead camshafts
  • Variable Valve Timing
  • 280 hp and 260 lb-ft of torque

 

3. Engine Block Heater – Available on both gasoline and diesel engines:

  • Electric operation
  • Pre-heats in cold-weather climates
  • Electric transmission heater included on diesel-engine applications

 

4. Hill Start Assist – Hill Start Assist system assists the driver when starting vehicle from stopped position on hill:

  • Maintains brake pressure for short time after driver takes foot off brake pedal
  • If driver does not apply throttle during this period, system releases brake pressure and vehicle will begin to roll downhill
  • System releases brake pressure in proportion to the amount of throttle applied as the vehicle starts to move

Criteria must be met for Hill Start Assist to activate:

  • Vehicle must be stopped
  • Vehicle must be on an 8% grade or greater hill
  • Gear selection matches vehicle uphill direction

Hill Start Assist works in reverse and all forward gears when criteria are met:

  • Will not activate if vehicle is in Neutral or Park

 

5. Six-Speed Automated Manual Transmission – The unique gearbox delivers the efficiency of a manual transmission with the functionality of an automatic:

  • Gear shifts and clutch functions are handled by an electro-hydraulic actuation system
  • Driver can manually shift at any time
  • Shifting software responds to driving conditions, including grade steepness
  • Tow/Haul adjusts shift points based on payload

A positive and comfortable driving experience that delivers impressive fuel economy!

 

6. Six-Speed Automatic Transmission

  • Delivers smooth shifts and optimum fuel efficiency
  • Upgraded to accommodate weight ratings
  • 3.86:1 final-drive ratio handles maximum load with confidence
  • Tow/Haul adjusts shift points based on payload

 

7. Suspensions

  • Five suspension levels are each specifically tuned to meet the ride and handling characteristics for customer requirementsLight duty
    • 1500 Cargo Van, 118” wheelbase, low roof

    Medium duty

    • 1500 Cargo Van, 136” wheelbase, low and high roofs

    Touring (includes 20 mm rear sway bar)

    • 2500 Windowed Van

    Heavy duty (includes 26 mm rear sway bar)

    • All 3500 Chassis Cab models
    • All 3500 Cutaway models
    • All 3500 Cargo Van models
    • All 2500 Cargo Van models
    • Available on 2500 Windowed Van

    High center of gravity (includes 26 mm rear sway bar)

    • Available on all 2500 and 3500 models

 

8. Tow/Haul Mode – When the vehicle’s load causes the transmission to hunt between two gears, select Tow/Haul mode:

  • Controlled through a switch in the center stack
  • Special transmission program to assist with towing
  • Inhibits shifts into sixth and fifth gear
  • Allows fourth gear to perform at slightly higher speeds
  • Improves vehicle performance
  • Contributes to optimal fuel efficiency by eliminating the hunting between gears

<<<Return to Ram ProMaster Overview

Back to top